Clean, prepare, shine and protect your car in under 30 minutes.
- Shampoo: Made from premium grade minerals and lubricants. It breaks down dirt and lifts it from the surface in moments. An average sized family car is complete in under 15 minutes.
- Spray Sealant: Unique SiO2 formula enhances the gloss of all surfaces (paintwork, glass, rubber) and leaving a protective layer which lasts up to 6 months, full application takes under 10 minutes.
What You'll Need
- Phase 1: Two buckets, Wash mitt OR sponge, Drying towel
- Phase 2: Two clean microfibre cloths
Minute 1: Prepare two buckets of clean warm water.
Minute 2: Add two caps of Clean + Prepare Shampoo to one of the buckets of water.
Minute 3: Rinse the car to remove any excess / loose dirt.
Minute 5: Soak your wash mitt / sponge into the shampoo bucket and begin shampooing the car from the roof down. Between each soak in the shampoo bucket, be sure to rinse your wash mitt / sponge in the clean water bucket, to remove all dirt and grit.
Minute 11: Leave the shampoo suds to sit on the car for 1 minute.
Minute 13: Rinse the vehicle clean, starting from the highest point of the car, to ensure all remaining dirt runs off the bottom of the car.
Minute 15: Using a drying towel, thoroughly dry all exterior surfaces.
Minute 18: Spray each panel of the vehicle with Shine + Protect Spray Sealant, evening out with a clean microfibre. Leave the product to rest on each panel and move onto the next.
Minute 24: Now product has been applied and evened out on every panel, buff off using a clean microfibre, starting with the first panel you applied the product to.
Minute 30: Cleaning, preparation, shine and protection is now complete!